FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Another EMU - 2SL

 
Post new topic   Reply to topic    Model Trains Interactive Forum Index -> On my workbench
View previous topic :: View next topic  
Author Message
ruedetropal



Joined: 22 Oct 2006
Posts: 814
Location: Accrington, Lancashire

PostPosted: Sun Jan 15, 2017 12:42 am    Post subject: Another EMU - 2SL Reply with quote

started on another EMU for 3D printing, the very distinctive 2SL, which were converted from LBSCR overhead supplied stock


I think I have captured the feel. problems with drawings as they were not quite to 1/76 scale, but luckily has some dimensions. I am finding this with scale drawings published in books. Maybe it is something in the way books are printed/published.
The roof will need a lot of rubbing down as it is virtually impossible to create the complex curves at front and where the roof dips. that does not bother me.
This is my 3rd EMU, after the Oerlikon and GEC EMUs.
_________________
Simon Dawson
Will try anything once, looking for the ultimate easy to set up portable exhibition layout, preferably French narrow gauge and with lots going on, not necessary on the rails.

http://www.rue-d-etropal.com
Back to top
View user's profile Send private message Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic    Model Trains Interactive Forum Index -> On my workbench All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group